10%-15% CCA Customization Bare Copper Clad Aluminum Wire 0.12 /0.14/0.16/0.24/0.3 of High Quality Cable Suppliers
Product Description
Copper Clad Aluminum (CCA) Introduction
Copper-clad aluminum wire is a double-metal wire composed of an aluminum core wire and a copper layer tightly wrapped around it.
According to the volume ratio of the copper layer, it can be divided into two types: 10% and 15%, their densities are 3.32g/mm3 and 3.63g/mm3 respectively, and the DC resistivity at 20°C is <0.027432mm2/m and <0.0267692mm2 respectively /m.
According to the mechanical properties, it can be divided into two types: soft state (A) and hard state (H).
Acceptance criteria for copper clad aluminum wire:
At present, copper-clad aluminum is produced and inspected according to the SJ/T 11223-2000 copper-clad aluminum wire standard. If the customer has special requirements, I can also formulate special production methods according to the customer's requirements.
Standard
Materials and Manufacturing
The copper-clad aluminum wire shall consist of an aluminum core and a continuous copper layer on the outside, and the copper layer shall be fully combined with the core wire. The quality of copper-clad aluminum wire should meet the requirements of this standard.
Dimensional quality
The size of the copper-clad aluminum wire should be indicated by the wire diameter in inches, and its decimal point is accurate to 0.0001 inch (0.003 mm). Wire diameters shall not vary by more than ±0.0001 inches (±0.003 mm) from the specified diameter for wire diameters up to 0.0100 inches (0.254 mm), and wire diameters shall not vary by more than 0.01130 inches (0.254 mm) and greater ±1% of stated diameter, dimensions expressed to the nearest 0.0001 inch (0.003 mm).
Power transmission:
1. Select the conductor material of the enameled wire;
2. Power cable conductor material;
3. Control cable conductor material;
4. Inner conductor of automobile and locomotive cables;
5. Construction cable conductor material;
6. Busbar conductor material;
7. Fuse;
8. RF shielded cable network;
Special magnet wire:
1. Select computer conductor material;
2. Mobile communication line;
3. Coils or cylinders used in aerospace or military equipment;
Normal packaging:
Spool size: DIN 130, DIN 160, DIN 185, DIN 200, DIN250, DIN 400, DIN 500, DIN630, DIN 780;
Category : CCAM CCA CU
Conductor OD:
0.12mm 0.16mm 0.2mm 0.4-1mm
Copper Clad Aluminum and Magnesium alloy wire is an electrical conductor which has an outer sleeve of coppermetallurgically bonded
to a solid aluminum alloy core.
The combination of these two metals make it uniquely suited to many electrical applications
The mechanical property of CCAM fine wire can meet the requirement of producing stranded wire, braided wire(on high speed braiding machine).
We can produce CCAM wire based on customer’s requirement.
Technical Characteristics
|
Clad type
|
Plated type
|
15H
|
15A
|
Hard(H)
|
Anneal(A)
|
Size range(mm)
|
0.12-8.00
|
0.12-8.00
|
0.12-8.00
|
0.12-8.00
|
Copper content(%) by weight
|
36-40
|
36-40
|
6-15
|
6-15
|
Conductivity(%)at 20℃
|
55
|
55
|
35-43
|
35-43
|
DC Resistivity(Ωmm2/m)
|
0.03085
|
0.03085
|
0.04718
|
0.04718
|
Tensile strength (Mpa)
|
≥220
|
≥160
|
≥250
|
≥180
|
Elongation(%)
|
≥1
|
≥8
|
≥1
|
≥8
|
Density(g/cm3)
|
3.63
|
3.63
|
2.85
|
2.85
|
Specification
Packing & Delivery
Company Profile
HUIZHOU ADP OPTICAL COMMUNICATIONS CO.,LTD was established in 2002 and is a professional manufacturer of Power cable 1mm2-500mm2, Optical fiber cable 2-288 cores, Telecommunication Cable 1-1200 pairs, Coaxial Cable and accessories Our total manufacturing area covers 8000 square meters, with a lot of international standards cable equipment, such as high speed cross product lines, high speed cross supervisor data return line systems (Zumbach), and a Cat6 twisters system. Our products strictly adhere to UL,ISO 9001, CE and RoHS international standards, which also cover our design, development, services, and management. We have more than 100 employees, including 20 technical personnel. Our annual production value researches to USD 200,000,000, giving us stable development and increased competitive power within the market. For the past ten years since its foundation. we have been sticking to"equality. mutual benefit and Quality First" foreign trade policies and we have established extensive business relation with countries and regions all over the world.Welcome to visit our factory.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 30% T/T in advance, balance before shipment
1. Any inquiries will be replied within 24 hours.
2. OEM/ODM available
1) Printing your logo on the cable.
2) Printing your logo on the pull our box, make according to your design.
3) Any your idea on cable, packing box are available.
3. High quality, reasonable and competitive price, fast lead time.
4. Good after-Sale Service.
1) All products will have been strictly Quality Checked in house before packing.
2) All products will be well packed before shipping.
5. Faster delivery
Sample order in stock, and 3-7 days for bulk production.
6. Shipping:
We have strong cooperation with DHL, TNT, UPS, FEDEX, EMS, China Air Post.
You also can choose your own shipping forwarders.